Hi.
I recently change version of jamovi windows to 2.4.4.0.
As result of this change, 7 of 9 modules i was installed show the message "installed version is not compatible".
Some of the modules are in beta version (flexplot 0.7.2) or version 1.0.0 (MEDA)
Is it normal?
Change versión-> a lot of modules not compatible
Re: Change versión-> a lot of modules not compatible
you'll find you can install newer, compatible versions, for the 2.4, from the library.
jonathon
jonathon
Re: Change versión-> a lot of modules not compatible
Thanks for the response.
Well, I found the problem.
The enterprise firewall do not allow to download the modules directly. Because this, i dowloaded the modules from the web page (resources->jamovi library).
Now i see it's specific for 2.3 series.
There are another sites (ftp...) i can download the correct modules?
Thanks in advance.
Well, I found the problem.
The enterprise firewall do not allow to download the modules directly. Because this, i dowloaded the modules from the web page (resources->jamovi library).
Now i see it's specific for 2.3 series.
There are another sites (ftp...) i can download the correct modules?
Thanks in advance.
Re: Change versión-> a lot of modules not compatible
Thanks a lot.
Problem 100% resolved.
Problem 100% resolved.