OK, could you try saving the following file:
https://gist.githubusercontent.com/jona ... _main__.py
to the following location:
C:\Program Files\jamovi 0.8.6.0\Resources\jamovi\server\jamovi\server
then try running jamovi
with thanks
Jamovi 0.8.2.2 can´t open and create new
Re: Jamovi 0.8.2.2 can´t open and create new
Hi,
I saved the file to the location.
After restarting the computer jamovi opens at the first click but there is still a blank page.
I saved the file to the location.
After restarting the computer jamovi opens at the first click but there is still a blank page.
- Attachments
-
- Jamovi_01.jpg (85.89 KiB) Viewed 7296 times
Re: Jamovi 0.8.2.2 can´t open and create new
hi yuna,
thanks for your help in this. we've narrowed down the issue to a component we use called 'tornado', and i'm discussing it with their developers:
https://github.com/tornadoweb/tornado/issues/2347
with thanks
thanks for your help in this. we've narrowed down the issue to a component we use called 'tornado', and i'm discussing it with their developers:
https://github.com/tornadoweb/tornado/issues/2347
with thanks
Re: Jamovi 0.8.2.2 can´t open and create new
hi yuna,
could you try starting the jamovi debug console, and running:
set PYTHONPATH=../Resources/jamovi/server && python -u -m jamovi.server 0 --stdin-slave --debug
give it a few seconds, this is what it looks like when it works (but i'm not expecting it to work):
then can you press ctrl+c, this will terminate the application, and hopefully provide some error information.
could you copy/paste this error information, or send us a screenshot?
with thanks
jonathon
could you try starting the jamovi debug console, and running:
set PYTHONPATH=../Resources/jamovi/server && python -u -m jamovi.server 0 --stdin-slave --debug
give it a few seconds, this is what it looks like when it works (but i'm not expecting it to work):
then can you press ctrl+c, this will terminate the application, and hopefully provide some error information.
could you copy/paste this error information, or send us a screenshot?
with thanks
jonathon
Re: Jamovi 0.8.2.2 can´t open and create new
Hi,
As you expected it didn't work but there also was no error information when I pressed ctrl+c.
As you expected it didn't work but there also was no error information when I pressed ctrl+c.
- Attachments
-
- Python jamovi 02.jpg (83.38 KiB) Viewed 7262 times
Re: Jamovi 0.8.2.2 can´t open and create new
Hi Jonathon,
I wasn't sure if I should add to this thread or create a new one, but I think I'm running into a similar problem. I was able to run a previous version of Jamovi, but when I updated to 0.8.6.0 I received an "Unable to Open, Unknown Exception" message. I tried uninstalling and installing previous versions of Jamovi but ran into the same issue. The computer I'm trying to use it on is within a locked environment, though I do have administrator privileges on the machine.
I read through this thread and tried running some of the commands you suggested and have attached screenshots and a log file here.
Thanks so much for your time and assistance!
- Jeff
I wasn't sure if I should add to this thread or create a new one, but I think I'm running into a similar problem. I was able to run a previous version of Jamovi, but when I updated to 0.8.6.0 I received an "Unable to Open, Unknown Exception" message. I tried uninstalling and installing previous versions of Jamovi but ran into the same issue. The computer I'm trying to use it on is within a locked environment, though I do have administrator privileges on the machine.
I read through this thread and tried running some of the commands you suggested and have attached screenshots and a log file here.
Thanks so much for your time and assistance!
- Jeff
- Attachments
-
- Jamovi_Stdin Slave Debug.png (49.32 KiB) Viewed 7248 times
-
- Jamovi_LocalHost Error.png (17.14 KiB) Viewed 7248 times
-
- Jamovi_Debug_Open Error.png (42.85 KiB) Viewed 7248 times
Re: Jamovi 0.8.2.2 can´t open and create new
Just adding the other attachments (had to zip the log file because it was too large)
- Attachments
-
- jamovi-log.zip
- (31.54 KiB) Downloaded 446 times
-
- Jamovi_Exit Code 3221225781.png (49.49 KiB) Viewed 7248 times
Re: Jamovi 0.8.2.2 can´t open and create new
hi jeff,
i've improved some of the error reporting, and the next release should provide a bit more information as to what's going on on your computer.
but i think your issue is different to yuna's. thanks for all the logs though.
with thanks
jonathon
i've improved some of the error reporting, and the next release should provide a bit more information as to what's going on on your computer.
but i think your issue is different to yuna's. thanks for all the logs though.
with thanks
jonathon
Re: Jamovi 0.8.2.2 can´t open and create new
hi yuna,
thanks for all your help. could you try the same as before, except running (all on one line):
i really appreciate you hanging in there this long. this bug is driving me slightly nuts.
with thanks
jonathon
thanks for all your help. could you try the same as before, except running (all on one line):
Code: Select all
PATH=".;..\\Resources\\lib;..\\Frameworks\\R\\bin\\x64;..\\Frameworks\\R\\library\\RInside\\lib\\x64" && set PYTHONPATH=../Resources/jamovi/server && python -u -m jamovi.server 0 --stdin-slave --debug
with thanks
jonathon
Re: Jamovi 0.8.2.2 can´t open and create new
hi jonathon,
Thank you for trying to solve this issue. It still doesn't work and there is still no error information.
Thank you for trying to solve this issue. It still doesn't work and there is still no error information.
- Attachments
-
- jamovi03 (2).jpg (119.69 KiB) Viewed 7221 times